Download Print this page

Epson Stylus COLOR 1520 Service Manual: Printer Mechanism Unit Removal

Color ink jet printer.
Hide thumbs

Advertisement

3.2.6 Printer Mechanism Unit Removal

1.
Remove the upper housing. (Refer to Section 3.2.1.)
2.
Disconnect the connector cables from the connectors CN3, CN4, CN8, CN9, CN10, CN11, CN12,
CN13, CN14, and CN15 on the C211 MAIN Board.
3.
Remove 4 screws (CBB, 4X14) securing the printer mechanism unit to the lower housing.
4.
Lift up the printer mechanism unit and remove it.

Be sure to lubricate the front top edge of the paper eject frame after installing the ASP printer
mechanism unit, which is not lubricated.

After replacing the printer mechanism unit, perform the following:
(Refer to Chapter 4.)

Input the head data which is marked on the package.

Bi-directional adjustment.
Screws (CB 4X14)
Rev. A
WORK POINT
REQUIRED ADJUSTMENT
Printer Mechanism Unit
Lower Housing
Figure 3-8. Printer Mechanism Removal
Disassembly and Assembly
Screws (CB 4X14)
3-11

Advertisement

Table Of Contents

   Also See for Epson Stylus COLOR 1520

   Related Manuals for Epson Stylus COLOR 1520

Comments to this Manuals

Symbols: 0
Latest comments: