3 . 2 . 5 I n t e r l o c k S w i t c h R e m o v a l
Step 1:
Remove the upper housing. (Refer to section 3.2.3.4.).
Step 2:
Disconnect the interlock
Step 3 :
Remove the CBB(M4 X 10) screw fixing the interlock switch set to the lower housing, and take
out the switch set from the inner space.
CBB
r
unit cable
x
o)
(M4
-
Figure 3-26. Interlock Switch Removal
connector from the driver board.
3-23
REV.-A