Setting The Initial Alignment Stitch Parameter (Pointpos.°); Setting The Start Bartack Parameter (Start Tack) - Duerkopp Adler 867-M PREMIUM Operating Instructions Manual

Programming
Operating Instructions 867-M PREMIUM - 02.0 - 05/2017
5.4.5 Setting the Initial alignment stitch parameter
(PointPos.°)
The distance of the needle from the material can be adjusted
to allow precise positioning of the sewing material when starting
sewing. The value entered here corresponds to the degree number
on the handwheel.
Menu item
(PointPos.°)
Initial alignment stitch
function
5.4.6

Setting the Start bartack parameter (Start Tack)

There are various options for setting the start bartack. All subitems
in the Start Tack menu are listed in the following table.
Settings that are more complex and therefore require further
explanation are described in more detail after the table.
Menu items
On
Stitches (↑)
Number of backward
stitches
Stitches (↓)
Number of forward stitches
Repetitions,
Number of sections in a
bartack
 p. 67
t Change,
Waiting time at turning
points
 p. 67
St.Len.Def.,
Default stitch length
 p. 67
Setting option
000 – 359 [°]
Setting option 1
ON/OFF
Value range 01 – 50
Value range 01 – 50
Value range 01 – 10
Value range
0000 – 1000 [ms]
ON/OFF
Setting option 2
65