REV.-A
4.2.4.15 Carriage Removal
1. Remove the printer mechanism (Refer to Section 4.2.4.1.).
2. Separate the main and the base units (Refer to Section 4.3.4. 12.).
3. Remove the RE (3) securing the loading lever of the plunger to paper holding lever L.
4. Remove the two HNO (4) nuts from the side frame L.
5. Remove the HNO (4) nut from the side frame R.
w
6. Spread both frames L and R apart, and remove the carriage guide shafts A and B.
(a) Left Side View
(b) Right side View
Fig. 4-41. Carriage Removal
4-32
paper Holding Lever L
":