7. Remove the printer mechanism.
8. Remove three for the LQ-850 or four screws for the LQ-105O, CPS(0) (3 X 6), securing the ground
plates to the base frame of the printer mechanism.
4.2.4.2 Printhead Removal
1. Remove the printer cover.
2. Remove the ribbon cartridge.
3. Move the head lock levers
4. Shift the printhead slightly
remove from the carriage.
Ground Plate
Fig. 4-16. Ground Platas Removal
to the outside.
toward the platen side (1) pull it upward, (2) slide it to the right, and (3)
Fig. 4-17. Printhead Removal
4 - 1 6