'here are several precautions you should take after performin9 troubleshooting and when packing
for transport:
printer
he
Slide the printhead to the middle of the printer. While holding the paper holding roller shaft open,
reattach the locking tabs to left and right of the printer mechanism.
Then slide the printhead all the way to the right, and insert the printhead protector between the
paper holding roller shaft and platen.
Locking Tab
Fig. 4-2. Locking Tabs and Printhead Protector Installation
3. Then, using a philips screw driver #2, reattach the two transport locking brackets by two CTBB
(4X 12) screws.
\
Transport Locking Brakets
Fig. 4-3. Transport Locking Brackets Installation
W A R N I N G
4 - 3
Locking Tab