REV.-A
4 . 2 . 2 P u s h T r a c t o r U n i t R e m o v a l
Remove the push tractor unit before removing the circuit boards and the printer mechanism from the
lower case.
1. Remove the upper case (Refer to Section 4.2. 1.).
2. Remove the two CPS(0) (3X 6) screws securing the push tractor to the printer mechanism.
3. Remove the push tractor unit by pushing it to the back.
(a)
Right Side View
Fig. 4-7. Push Tractor Unit Removal
4-8
X
(b) Left Side View