Epson DFX-8500 Service Manual page 17

‰
Labels :
PW (width)
PL (length)
LM (left margin)
RM (right margin)
TM (top margin)
BM (bottom margin)
Notes 1: Feeding backward or paper (PATH) selection are prohibited.
Notes 2: If In the top 75 mm area, the paper feeding pitch may be irregular.
Notes 3: If the optional pull tractor is used, the top 120 mm area should not be printed..
Notes 4: Forms-override printing is available 20 lines after the paper end.
(Paper feeding pitch is not guaranteed.)
The end of the printable area is 9 to 15 mm apart from the bottom edge of the paper.
Rev. B
Refer to Figure 1-4.
.
Continuous Paper
Refer to Section 1.2.12.
Refer to Section 1.2.12.
13 mm to 31mm
13 mm or more
2.6 mm or more
4.2 mm or more
Figure 1-4. Label Printable Area
GENERAL DESCRIPTION
9
1-