Indicators - Epson DFX-8500 Service Manual

DFX-8500

1.4.1.2 Indicators

The control panel contains fifteen LEDs.
‰Rear (2) (Green / Red) :
„Green LED on when the rear paper path is selected with paper.
„Red LED on when the rear paper path is selected without paper.
„Off when the front paper path is selected.
‰Front (2) (Green / Red) :
„Green LED on when the front paper path is selected with paper.
„Red LED on when the front paper path is selected without paper.
„Off when the rear paper path is selected.
‰Pause (Orange) :
„The LED on when the printer is paused, and it is off when the printer is not paused.
„The LED blinks when the printer is in the print head hot status.
‰Top of Form (Green) :
„The LED on when the top of form position is adjustable and tear off position is adjustable.
‰Tear Off (Green) :
„The LED on when the paper is in Tear off position and it is off when the paper is out of the Tear-off
position.
‰Copy (Green) :
„The LED is on at copy mode, and it is off at normal mode.
‰Pitch (Green) :
„The status of Pitch selection is displayed by three Pitch LEDs.

: 10 cpi

: 12 cpi

: 15 cpi

: 17 cpi

: 20 cpi

: PS
‰Font (Green) :
„The status of Font selection is displayed by two Font LEDs.

: Super draft

: Draft

: Roman

: Sans Serif
‰Power (Green) :
„The LED is on when the printer is powered on, and it is off when the printer is powered off.
‰Paper Out (Red) :
„The LED is on when the printer is in the paper out status, and it is off when the printer is out of this
status.
„The LED blinks when the printer is in the paper jam status.
‰Ribbon (Red) :
„The LED blinks when the printer is in the ribbon jam status.
‰Paper Select (Seven-segment, Green) :
„The LED indicates selected paper No.
1-26
( : LED off, : LED on.)
( : LED off, : LED on.)
Rev. B