Epson DFX-8500 Service Manual page 18

DFX-8500
‰
Continuous forms with labels :
PW (width)
PL (length)
LM (left margin)
RM (right margin)
TM (top margin)
BM (bottom margin)
LFL (left margin from label)
RFL (right margin from label)
TFL (top margin from label)
BFL (bottom margin from label)
LOL (left margin on label)
ROL (right margin on label)
TOL (top margin on label)
BOL (bottom margin on label)
Notes 1: Feeding backward or paper (PATH) selection are prohibited.
Notes 2: If In the top 75 mm area, the paper feeding pitch may be irregular.
Notes 3: If the optional pull tractor is used, the top 120 mm area should not be printed..
Notes 4: Forms-override printing is available 20 lines after the paper end.
(Paper feeding pitch is not guaranteed.)
The end of the printable area is 9 to 15 mm apart from the bottom edge of the paper.
Figure 1-5. Continuous Forms with Labels Printable Area
1-10
Refer to Figure 1-5.
Continuous Paper
Refer to Section 1.2.12.
Refer to Section 1.2.12.
13 mm to 31mm
13 mm or more
2.6 mm or more
4.2 mm or more
65 mm or more
65 mm or more
12.5 mm or more
12.5 mm or more
5 mm or more
5 mm or more
2 mm or more
2 mm or more
Rev. B