Epson DFX-8500 Service Manual page 115

DISASSEMBLY AND ASSEMBLY
Step 5: Remove the four CBB (M3x12) screws and two CBS (O) (M3x8) screws securing the C204 MAIN
board unit and remove the board.
Figure 3-34. C204 MAIN Board Removal 4/4
ADJUSTMENT REQUIRED
When you install the C204 MAIN board assembly, perform the following adjustments:
Platen gap motor value (platen gap) adjustment (described in Section 4.1.7).
Bidirectional printing adjustment (described in Section 4.1.8).
3-25
Rev. B