Grinding The Scissors Knives For Sub-Class - 241000 - Duerkopp Adler 558 Service Instructions Manual

43.2 Grinding the Scissors Knives for Sub-class - 241000

76
1
2
3
4
5
The different cutting length assemblies are equipped with different
upper and lower knives.
Order no.s of the scissors knives for underthread and gimp
Cutting length
assembly
L1
L2
L3
L4
Caution Risk of Injury !
Before removing the trimming knives pull the mains plug.
–
Remove the nut for pressure screw 3 to be found on the underside.
–
Unhook springs 4 and 5.
–
Screw out pressure screw 3 and remove scissors knives 1 and 2.
–
Regrind the scissors knives according to the information given.
–
Insert the scissors knives and check the setting as per chapter 39.
1
Upper knife Lower knife
558 8816
558 8858
558 8868
558 8878
2
558 8817
558 8859
558 8869
558 8879