Duerkopp Adler 558 Service Instructions Manual page 69

1
2
3
4
5
6
–
By turning the hand crank bring the movable knife 2 back into the
left end position.
–
Loosen screws 6.
–
Set the fixed knife 5 with its blade 1 to 2 mm above the blade of the
movable knife 2.
–
Tighten screws 6 again.
–
Screw cover plate 1 on again.
–
With the greatest left swing of the knife lever 4 and spread
clamping plates set the angle 3 to 0.3 mm from the knife lever.
With jammed knives the knife lever 4 is repelled by angle 3.
This occurs after cutting when the spread clamping plates open
and return to the base position.
69