Attaching The Halogen Bulbs - Casablanca Twain Owner's Manual

5
Align the light fixture to the four posts on the
light adapter plate using the light fixture screws.

Attaching the Halogen Bulbs

NOTE:
Do not remove the protective sleeve on
the halogen bulb. Touching the glass casing of
the bulb may damage or break the glass.
6
Cut the sleeve to expose the connection end of
the bulb. Continue to hold the bulb by the sleeve during
installation. Screw both halogen bulbs into the light fixture.
Ñ
CAUTION:
Only use maximum 50-watt
halogen bulbs!
NOTE:
In compliance with US Federal Energy
Regulations, this ceiling fan contains a device
that restricts the light fixture to a maximum of
190 watts. Exceeding that limit or the marked
limit on this product may result in a fire hazard
or improper operation.
STEP 5
Posts (4)
STEP 6
Twain
Light fixture
Light fixture
screws (4)
Halogen bulbs (2)
™
19