Attaching The Blades - Casablanca Stealth Owner's Manual

Casablanca stealth ceiling fans: owners manual

Hide thumbs Also See for Stealth:

Instructions manual (18 pages)

Manual (16 pages)

Owner's manual and installation manual (2 pages)

Table Of Contents

Table of Contents

TEALTH

Step 3a. Attach the 5 blade tips to the blades using two

6-32x

⁄

" round head screws provided. Note: the screws have

locktite on them, so once they are installed it will be difficult

to remove the screws.

Step 3b. Attach each of the five blades to the blade holders

using four of the truss head screws and fiber washers pro-

vided for each blade. The truss head screw is placed through

the blade and then a fiber washer is pressed on so that it is

between the blade and blade holder; see the detail drawing

below. Hand tighten each truss head screw firmly.

3b - BLADE INSTALLATION:

BLADE

TIP

Step 4. To hang the fan body in the canopy, support the fan

at the center of the glass holder and top support and insert

the ball into the canopy opening. Rotate the fan body until

the slot in the ball fits into the pin opposite the canopy

opening.

TOP SUPPORT

GLASS

HOLDER

INSIDE

Step 5. Attach the fan wires to the ceiling fixture outlet box

wiring by twisting the bare ends of the wires together and

securing with a wire nut. Connect in this order:

• GREEN leads from mounting plate and fan to GROUND con-

ductor of power source. Secure with wire nut.

• WHITE wire from fan to white NEUTRAL wire in ceiling

fixture outlet box. Secure with wire nut.

• BLACK wire from fan to black (or red) POWER wire in ceil-

ing fixture outlet box. Secure with wire nut.