Table of Contents
Advertisement
ATTACHING THE BLADE TO THE FAN
BLADES
(Set of 5)
Step 11. Take one blade and align it onto the blade
iron of the fan. There is only one way it will fit.
Align the blade medallion on to the blade and in-
stall the 3 screws per blade. Secure by hand
only,do not use power tool.
INSTALLATION HALOGEN BULB AND GLASS
Step 11. If the glass globe has already been installed,
rotate the shade in a counter-clockwise rotation and
gently set aside.
Step 12. Remove the socket plug from the electrical
socket
CAUTION! Do not touch the glass bulb with fin-
gers - it is extremely important that the glass be
clean.
Step 13. Screw the 100 Watt Halogen bulb into the
socket. Do not touch the glass bulb with your fingers–it
is extremely important that the glass be clean. If it is
touched, or dirty, clean carefully with a tissue. A dirty
glass bulb will cause the bulb to fail almost
immediately.
Step 14. Position the indentations in the outer rim of
the glass shade so that they line up with the tabs on the
inside surface of the fan light fixture rim.
Step 15. Carefully lift the glass shade up inside the light
fixture as far as it will go.
Step 16. Rotate the shade in a clockwise direction until
it is held tightly in place by the three tabs.
CAUTION! Improper installation of globe may
cause it to be damaged or it to fall and break.
6
BLADE
MEDALLION
(5)
SCREW
Hide quick links:
Advertisement
Table of Contents
