Download Print this page

Advertisement

1.
Brake master cylinder
2.
Brake hose holder
3.
Brake hose
A.
Install the brake hose so that its
pipe portion directs as shown
and lightly touches the projec-
tion on the brake caliper.
B.
Pass the brake hose into the
brake hose holders.
C.
If the brake hose contacts the
spring (rear shock absorber),
correct its twist.
D.
Install the brake hose so that its
pipe portion directs as shown
and lightly touches the projec-
tion on the brake master cylin-
der.
2-23
CABLE ROUTING DIAGRAM

Advertisement

Comments to this Manuals

Symbols: 0
Latest comments:
  • nick Jan 26, 2016 10:47:
    The download is jacked up, so it's only really viewable on the site, but can't really complain since it's free.