Yamaha YZ450F(Y Owner's Manual page 161

Table of Contents

Advertisement

7. Install:
• Front fork "1"
• Upper bracket "2"
• Temporarily tighten the pinch bolts
(lower bracket).
• Do not tighten the pinch bolts (up-
per bracket) yet.
8. Install:
• Washer "1"
• Steering stem nut "2"
Steering stem nut:
145 Nm (14.5 m•kg, 105
ft•lb)
9. After tightening the nut, check the
steering for smooth movement. If
not, adjust the steering by loosen-
ing the steering ring nut little by lit-
tle.
10. Adjust:
• Front fork top end "a"
Front fork top end (stan-
dard) "a":
5 mm (0.20 in)
11. Tighten:
• Pinch bolt (upper bracket) "1"
Pinch bolt (upper brack-
et):
21 Nm (2.1 m•kg, 15
ft•lb)
• Pinch bolt (lower bracket) "2"
Pinch bolt (lower brack-
et):
21 Nm (2.1 m•kg, 15
ft•lb)
Tighten the lower bracket to speci-
fied torque. If torqued too much, it
may cause the front fork to mal-
function.
5-30
STEERING

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

2009 yz450fy2009 yz450f

Table of Contents