Customer Self-Repair
Customer Self-Repair enables you to obtain replacement parts and install them yourself on your
workstation. See
Predisassembly procedures
Perform the following steps before servicing the workstation:
1.
Close any open software applications.
2.
Remove any diskettes or CDs from the workstation.
3.
Shut down the operating system.
4.
Power off the workstation and any peripheral devices that are connected to it.
5.
Remove or disengage any security devices that prohibit opening the workstation.
6.
Disconnect the power cord from the electrical outlet and from the workstation.
7.
Disconnect all peripheral device cables from the workstation.
ENWW
http://www.hp.com/go/selfrepair
for more information.
Customer Self-Repair
55