Exiting The Utility; Configuring The Boot Order; Rebuilding The Operating System - HP Xw4550 - Workstation - 2 GB RAM Technical Reference Manual

Exiting the utility

To conclude RAID configuration, choose one of the following:
●
Press Esc
●
Press Y

Configuring the boot order

1. Reboot the workstation and enter the Computer Setup (F10) Utility.
2. Select Storage>Boot Order.
3. Use the arrow keys to select ATAPI CD-ROM Drive, and then press Enter.
4. Use the up and down arrow keys to move ATAPI CD-ROM Drive to the top position, and then
press Enter.
5. Verify that the xw4550 Recovery/OS CD/DVD is installed in the optical drive.
6. Press F10

Rebuilding the operating system

When the recovery CD boots, follow the onscreen instructions to install the operating system on the
newly-created RAID Volume.
ENWW
twice to exit the utility.
to reboot.
twice, press Enter, and then press F10 again to accept changes and reboot.
Configuring SATA RAID devices 129