4.
Slide the system board toward the front of the chassis and then lift it (2) out of the workstation.
Figure 4-53
To replace the system board:
1.
Lay the system board back in the chassis slightly away from the rear of the chassis. The mounting
hooks should fall into the recesses of the tray so the tray lays flat on the chassis base.
2.
Slide the tray towards the rear of the chassis until the heatsink mounting holes align.
3.
Reinstall the processor heatsink, cards, and cables.
Product recycling
HP Planet Partners recycling service provides an easy method to recycle computer equipment,
rechargeable batteries or HP printing supplies. HP processes ensure that unwanted hardware or empty
HP printing supplies are recycled responsibly.
For information on recycling HP components or products, see: http://www.hp.com/go/recycle.
96
Chapter 4 Removal and replacement procedures
Removing the system board
ENWW