Led Indicators - HP Model 745 - VME Workstation Handbook

Table 4-1 provides information on interpreting the system status from the LEDs.
SYSFAIL POWER
(Red) (Green)
Off Off
On 2Hz Flash
On Off
On 1 Flash/
second
On 4 Flash/
second
On On
Off On
Troubleshooting
Firmware Selftest Failures
Table 4-1 LED Indicators
Meaning
No Power
Normal Power-on/
selftest
Memory Failure
CPU (board) Failure
No console identified
OS is booted with
VME services failure
OS is booted with
VME services OK
4-8
Possible Solution
Check for board seating in
chassis.
If the system never proceeds
past this point, either the con-
sole path is not set or there is
a critical CPU failure.
Refer to "Using the Emer-
gency Interactive Console
Search" in Chapter 3 to set the
console path. If this fails,
replace the system board.
Troubleshoot for failed RAM
card or problem with the
RAM connection.
Replace the system board.
Check the console search path
and keyboard connections. If
no problem is found, replace
the system board.
Check the Operating System
VME services. Check that
VME services is configured
in the kernel.