To access the Support Tools Manager, you must be logged in as "root" or "superuser", and
perform the following steps:
1
In a terminal window, type the following at the # prompt to invoke the command line
interface:
# cstm
2
The following message appears:
Support Tool Manager
Type 'help' for a list of available commands:
CSTM>
3
To verify the system operation, type the following at the CSTM> prompt:
CSTM> verify all
Messages similar to the following appear:
Verification has started on device (CPU).
Verification has started on device (FPU).
CSTM>Verification of (FPU) has completed.
CSTM>Verification of (CPU) has completed.
4
Press Enter to return to the CTSM> after all test results are reported.
5
To exit the Support Tools Manager, enter the following:
CTSM> exit
If any tests failed, run Self Test and ISL diagnostics to isolate the problem.
Troubleshooting
Running System Verification Tests
Version A.01.00
4-24