HP Model 745 - VME Workstation Handbook page 60

The following listing is a sample memory configuration table when memory modules are
properly installed and configured:
MEMORY INFORMATION
MEMORY STATUS TABLE
Slot
----------------
0
1
2
---------
TOTAL
If the power-on selftest detects a defective or damaged memory card, using the memory
command (from the Information Menu prompt) displays the following information:
WARNING: One or more memory banks were not configured due
to errors in the following SIMM(s).
Physical Slot
-------------
3
+-------------------------+
Slot 3 |
+-------------------------+
+-------------------------+
Slot 2 |
+-------------------------+
+-------------------------+
Slot 1 |
+-------------------------+
+-------------------------+
Slot 0 |
+-------------------------+
==========================================================
Side view of Model 9000/744/165L Single Board Computer PCB.
SUGGESTION: If possible, turn off the computer and check to
see if the memory card(s) are seated properly.
Memory
HVERSION
---------------
0x0740
Configuration
Displaying the Current Memory Configuration
Size Status
64MB Configured
32MB Configured
64MB Configured
160MB
Error Type
-----------
SIMM hardware error
Memory Card Stack
Failed
64MB OK
32MB OK
64MB OK
---------------
3-24
|
|
|
|
SVERSION
0x0900