Home Led Board - HP Pavilion 13 x2 Maintenance And Service Manual

Home LED board

Description
Home LED board
Before removing the home LED board, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Disconnect the tablet from the keyboard dock (see
on page
5. Remove the display rear cover (see
6. Disconnect the battery cable (see
7. Remove the bottom trim (see
To remove the home LED board:
1. Disconnect the cable from the connector on the board (1).
2. Lift up to disengage the adhesive that secures the board from the tablet (2) and remove the board.
Reverse this procedure to install the home LED board.
30).
Bottom trim on page
Releasing the tablet from the keyboard dock
Display rear cover on page
Battery cable on page 44).
59).
Spare part number
737898-001
43).
Tablet components 61