HP Model 745 - VME Workstation Handbook page 84

Chassis
Code Range
9000 Various
9001 Various
A008 Various
A00F Various
A088 Various
A0BD Various
A50F Various
A70F Various
C200
C201
Memory
C202
C2E0
C300
744 SBC
C3FF
744 SBC
Troubleshooting
Firmware Selftest Failures
Table 4-3 Chassis Codes
FRU Description
Device specified by
console path not found
Could not find a con-
sole device
Could not locate a boot
device
Could not get path for
current module
Unable to boot, no con-
sole
ENTRY_INIT returned
device not ready status
Failed to init boot
device specified by pri-
mary path
Failed to init alternate
boot device
Starting memory con-
figuration
Starting destructive
memory test
Starting non-destruc-
tive memory test
Memory config and
self-test complete
a CPU is executing early
selftests
a CPU is executing late
selftests
4-14
Possible Solution
Confirm that the paths are
set correctly, cables are cor-
rectly connected, and power
is turned on to external
devices.