HP Model 745 - VME Workstation Handbook page 29

Schematics
In support of the repair philosophy, this manual contains information to the assembly
level. Schematics are not available for these products.
Supported Configurations
Only products with Hewlett-Packard approved parts, accessories, peripherals, operating
systems and application programs are supported by Hewlett-Packard. Any product with
other than HP approved hardware or software connected or installed must have the non-
HP approved hardware and software removed by the customer before On-Site repair is
accomplished.
Repair Services
Hewlett-Packard supports three repair services:
Return to Hewlett-Packard Repair
On-Site Repair
Customer Repair
For Return to Hewlett-Packard Repair, customers return the product to their local HP
Sales and Service Office, where an HP Bench Repair Engineer troubleshoots, and repairs
the hardware to the assembly level. The defective assembly is replaced with a new or
rebuilt assembly and the product is returned to the customer. This service is available
through a service contract or a time-and-materials basis.
On-Site Repair is performed at the customer's site. This service is available through a ser-
vice contract or a time-and-materials basis.
Customers have the option of repairing their own HP products. Contact your nearest
Hewlett-Packard Sales and Service Office for information concerning service training,
special tools and test equipment, and spare parts.
Product Information
Product Identification
1-15