Parameters - Native Instruments Absynth 5 Reference Manual

6.4.1 Parameters

Master Section
•
Beat switch: With the Beat switch you select whether the value in Time control should be
indicated in seconds (Sec) or in beats (Beat), ie in quarter notes.
•
Master Time control: Determines the maximum delay of the three taps.
•
Master Lowpass control: Determines the cut-off frequency of the lowpass filter, which the
feedback signal runs through (in Hz).
Tap Section
•
Time control: Determines the delay of each respective tap in percent of the value se-
lected in the Time control in the Master section.
•
Sensitivity control: Defines the impact of the control signal received via Macro Control on
each tap's Time control (in percent).
•
Inversion switch: Turning on the Inversion switch inverts the impact of the control signal
received via Macro Control.
•
Gain control: Defines the signal proportions for each tap at the output in dB. For example,
a value of -6dB reduces the level by half.
•
Pan control: Positions the respective tap's signal in the panorama of the output signal. A
0 value corresponds to a position at the extreme left, 1 to a position at the extreme right
and 0.5 to the middle.
•
Feedback control: This parameter exists only for the first Tap. It regulates the level of the
signal, which is re-routed to the input, as a percentage of the original signal's level.
ABSYNTH 5 Reference Manual – 93