Envelope Modulation - Native Instruments Absynth 5 Reference Manual

The LFO-parameters that are specific for the Breakpoint can be assembled directly beneath
the global parameter. They only appear when you have selected the desired Breakpoint.
•
Depth control: Adjusts the Depth of the LFO ranging from 0 to 100.
•
Sec control: Adjusts the speed of the LFO (in seconds). A fast LFO has a low value for
example.
•
S/H Sec control: With this you can determine the Sample&Hold-speed (in seconds). A low
value corresponds to a high speed. This option is only active if the Wave/SH Toggle is set
to Sample&Hold in the global parameters section.

8.5 Envelope Modulation

Every Breakpoint position in an Envelope can be set via Macro Control. It is even possible to
control every Breakpoint of an Envelope with its own Macro Control. This enables the shape of
an Envelope to change dynamically and in synch with the information that comes in through
Macro Control or MIDI Velocity. Each Breakpoint responds individually to control signals for
time and amplitude. It is therefore possible to dynamically change the form of the Envelopes
using either Velocity or the signal that is transmitted through Macro Control.
Envelope Breakpoint with activated Macro Control
ABSYNTH 5 Reference Manual – 125