Native Instruments Absynth 5 Reference Manual page 91

Comb Section
•
On/Off switch: Allows each of the six comb filters to be turned on or off.
•
Time control: Defines the frequency (and hence the delay time) of the respective comb
filter. This is measured in percentage, and correlates to the value you have selected in
the Master Time control.
•
Sensitivity control: Defines (as a percentage) how the Macro Control's control signal af-
fects the Time control of the comb filter.
•
Inversion switch: If you turn on the Inversion switch, you invert the effect of the Macro
Control's control signal (see the section on Modulation und Sensitivity control).
•
Feedback control:Establishes the feedback signals' level of every individual filter as a
percentage, which correlates to the value you choose in the Master Feedback control.
•
Lowpass control: Controls the cut-off frequency of each Lowpass filter. This is measured
in percent, which again correlates to the value set forth in the Master Lowpass control.
•
Gain control: Determines the level of each respective comb filter signal at the output
signal in dB.
•
Pan control: Positions the signal of the respective comb filter within the panorama of the
output signal. The value 0 corresponds to the position on the extreme left and 1 corre-
sponds to the position on the extreme right. 0.5 corresponds to the middle position.
ABSYNTH 5 Reference Manual – 91