Assignments Page - Native Instruments Absynth 5 Reference Manual

10.4 Assignments Page

Assignments page
On the Assignments page you can fine-tune every individual Macro Control. On the left you
see the list of all Macro Controls. When you select a Macro Control, its parameters appear
below (these are the same as on the Controllers page):
•
The MIDI CC# control shows the current assigned MIDI Control Change Number (MIDI
CC#). You can change the assigned MIDI CC by double-clicking on the indicated value
and entering a new number. Alternatively, you can click on the displayed value and drag
your mouse vertically. You can also use MIDI Learn to assign a new MIDI Control Change
Number, by clicking on the Learn button and moving the preferred control element on
your MIDI controller.
•
The horizontal Slider with the label Control Value indicates the current value of the Macro
Control. You can change the value by dragging this Control Value Slider with your mouse.
In the Assignment Table in the middle of the Assignments page you can use different set-
tings for every parameter assigned to a Macro Control. The list always shows the parameters
that are assigned to the Macro Control selected from the Macro Controls List. You can add
additional parameters to the list by making a right click on the parameter to be affected (for
example, Filter Cutoff in a Filter Module of the Patch Window) and then select Macro Control
from the context menu that the parameter is to control from that point on. In order to sepa-
rate the parameter from the Macro Control, select the entry Not assigned from the context
menu. The entry then be removed from the Assignment Table.
ABSYNTH 5 Reference Manual – 147