Single Mode - Native Instruments Absynth 5 Reference Manual

•
Save Channel Template: Allows you to save the current Channel settings as a Template in
the Universal Library. In the dialog that opens, choose the name and saving location for
the Template, then click then on "OK" to save the Template.
•
Mutate Oscil: Applies a Mutation to that particular Oscillator.
•
Retry Mutate Oscil: Retries the Mutation for that particular Oscillator.
For the last two entries, the Mutation settings are those defined in the Browser's Mutaton
section (see section 11.3,

5.4.3 Single Mode

Oscillator in Single mode
In the Single mode, a single main oscillator is active.
The Main panel contains all parameters controlling the main oscillator:
•
Synthesis menu: Selects the desired synthesis process (see section
Panels and Tabs"
•
Waveform Selector: A click on the Waveform Selector opens the Waveform Selection dia-
log where you can select the Waveform for the Oscillator (see section
Selector and Waveform Selection
•
Anti-Alias switch: Turns the anti-aliasing on and off (see section
above for details).
•
Frequency menu and Frequency control: Enables you to enter the oscillator's frequency as
a transposition of the played note (Trans), as a relationship (Ratio) with the played note,
as a fixed Frequency (Hz) or via a fixed MIDI note (Note). See section
Menu and Frequency
"Mutator", for more on this).
above for details).
dialog", above for details).
Control", above for details.
5.4.1 "Oscillator's
5.3.1, "Waveform
5.3.3 "Anti-Alias Switch"
5.3.2, "Frequency
ABSYNTH 5 Reference Manual – 53