Surround Page - Native Instruments Absynth 5 Reference Manual

•
Samples Directories: These three fields allow you to set paths to the directories contain-
ing the samples used by your Sounds. To define a path, click on the Browse button under
one of the fields, navigate to the desired folder on your hard drive and click "OK."
•
Template Libraries Directory: This field allows you to set the path for the directory contain-
ing your various Templates (Envelopes, Waveforms, modules, Channels...). To change the
path, click on the Browse button under the field, navigate to the desired folder on your
hard drive and click on "OK." For more info on the Templates, please refer to section
5.2.3 "Universal
•
Auto balance patch channels: If this option is enabled, ABSYNTH 5 controls the output
of the three individual Channels in the Patch Window so that the main output remains
constant and do not clip. That is, if you were to increase the level of one Channel,
ABSYNTH 5 would automatically decrease the levels of the two other Channels.
•
Auto rename control macro on first assignment: If this option is enabled, a Macro Control
that has had a parameter assigned to it takes over the name of this parameter – but only
if no other parameters have already been assigned to it.

3.4.2 Surround Page

The Surround page allows you to configure ABSYNTH 5's surround output channels.
The Surround page of the Options dialog
Library."
ABSYNTH 5 Reference Manual – 24