Wave Morph - Native Instruments Absynth 5 Reference Manual

7.5 Wave Morph

The Wave Morph function allows you to dynamically blend two waveforms into a new shape.
The two Waves used in a Morph Wave can then still each be edited with all the same features
of a normal Wave in the Waveform page of the Wave Window. If you load a Morph Wave into
an Oscillator Module or anywhere else, the combination of the two Waveforms will be used.
The Morph Wave is determined by the position of the Morph Mod parameter in the Morph
page of the Wave Window. You can, of course, freely modulate the Wave Morphing's param-
eters. That way, you create lively, dynamic sounds that can change subtly or even tak on a
completely new character while being played.
To load a Morph Wave, do the following:
1. Activate an Oscillator in the Patch Window.
2. In the Waveform Selector, pick a Wave model from the Morph Waves (e.g. Miss Morphy).
Waveform Selector
3. Click on the New button. This creates a new waveform that uses the selected waveform
as its model.
4. ABSYNTH opens the Wave Window automatically.
→
The Morph Wave is loaded into the Wave Window automatically.
ABSYNTH 5 Reference Manual – 110