Device Setup Menu - HP Kayak XU 04xx Administration Manual

Sync Rate (Mega
Bytes/sec)
Width (bits)
NOTE

Device Setup Menu

When you select a device from the Device Selections menu, the Device
Setup menu is displayed:
Symbios Logic SCSI Configuration Utility
1. SYM53C875
Dev0 N/A Setup
Sync Rate (Mega Bytes/sec)
Width (bits)
Disconnect
Read Write I/O Timeout (secs)
Scan for Device at Boot Time
Scan for SCSI LUNS
Queue Tags
Format
Verify
Help.
Restore Default Setup
Exit this menu.
Use arrow keys to select from menu. Then press ENTER
This menu provides information about an individual SCSI device.
To make changes to these settings, select an item from the list and
press .
This option lets you set the transfer rate for the device. The available
choices are Off, 10 MB/sec, 20 MB/sec, or 40 MB/sec. For example, for a
Fast SCSI device, you would select 10 MB/sec.
This option lets you set the maximum SCSI data width at which a 16-bit
host adapter negotiates. The host adapter and SCSI device must agree
on a width at which they can both operate
For example, if you have a 16-bit device on a 8-bit wide cable (bus), the
width at which they can both operate is 8-bits.
Similarly, if you have an 8-bit device on a 16-bit wide cable (bus), the
width at which they can both operate is 8-bits.
If a 16-bit device is used on an 8-bit wide cable, you may need to
disable SCAM.
Version 1.00
BIOS Code Segment: C800
Configuring the SCSI Bus
40 MB/sec
16
On
10
Yes
Yes
On
English 15