HP Kayak XU 04xx Administration Manual page 15

Adapter Boot Order
Change Adapter Status
Display Mode
Mono/Color
Help
Quit
Configuring the SCSI Bus
This option is only available when you have more than one host adapter
installed. It lets you set the order in which host adapters boot. When you
select this option the Boot Order menu is displayed.
To change an adapter's boot order (from the Boot Order menu), select
it and press
sequence number. When you are satisfied with the boot order, press
to exit this menu.
This option lets you activate or deactivate a host adapter and all SCSI
devices attached to it. The change takes place after a re-boot, which is
automatic when you exit from the Configuration utility after using this
option to make a change. When you select this option the Change Status
on Next Boot menu is displayed.
To toggle an adapter's status 'on' or 'off' (from the Change Status on
Next Boot menu), select it and press
with your selections, press
This option determines how much information about your host
adapter(s) and SCSI devices is displayed on the screen during the PC
Workstation's start-up routine. For more complete information, select
the verbose setting; for a faster boot, select the terse setting.
This option lets you choose between a black and white or a color display
for the SCSI configuration utility. If you are using a black and white
monitor, you may need to select the mono setting to get a more readable
screen.
This option displays a help screen giving information about the Main
menu.
This option exits the SCSI Configuration utility.
10 English
. You are then prompted to enter the new boot
to exit this menu.
. When you are satisfied