QUICKSHIFT 5 GEARBOX
1 Mode selection button: enables
you to move from manual mode to
automatic to manual mode at any
time with the engine running.
automatically returns to the middle
position after use.
2 automatic mode
3 brake pedal depressed warning
4 gear display
5 not used
6 gearbox fault warning light.
The gear used (1, 2.., 5, N, R) is
indicated in the instrument panel
display. In automatic mode, (A) is
Switch on the ignition.
The display lights up on the
As long as neutral is displayed (N),
start the engine but do not depress
If a gear other than neutral (N) is
displayed this will flash; it will only
be possible to start the engine if you
press down the brake pedal (the
warning light 3 will come on if you
forget) when holding the key in
The vehicle will then change to
neutral (N) automatically and the
engine will start.
Note: do not attempt to start the
engine by pushing the vehicle if the
battery is flat (the display remains
off when the ignition is switched