Download Print this page

Advertisement

FITTING A RADIO
Radio installation 1
Unclip and remove the cover. The
aerial, + and – supply connectors
and left and right speaker wires are
fixed to the rear face of the cover.
• In all cases, follow the manufacturer's fitting instructions carefully.
• The specifications of the supports and wires (available as a Renault parts accessory) vary depending on equipment
level of your vehicle and the type of radio.
To find out their reference, consult your Renault Dealer.
• Any operation on (or modification to) the electrical system must be performed by a Renault Dealer since incorrect
connections might damage the electrical installations or any components connected to it.
1
Front speakers
Unclip cover 2 using a flat blade
screwdriver type tool at the arrows.
2
Remove the two screws 3 and then
take off the protective card to reach
the speaker wires.
3
5.27

Advertisement

This manual also for:

Clio 1.2, Clio

Comments to this Manuals

Symbols: 0
Latest comments:
  • Lester paul Nov 20, 2017 08:28:
    Renault he car the futurefutu​re stronger easy to handle .a smoke ride all the way.
  • Ahmed saeex Oct 19, 2017 04:03:
    I would like to ask how can i adjust the car valves ?
    Or the number or size should be adjusted for clio 2003 modle 1200 c.c.
  • jackie sage Nov 01, 2015 02:46:
    i have a wobble on my clio sport especially when going left
  • Peter Stevens Feb 01, 2015 02:39:
    What number belt do I need for Renault clio symbol 2003 alternator​. engine is 1.4 petrol 5 speed manual. this is the second belt I have had to replace in 2 years
  • Mel chalmersj Sep 27, 2013 04:11:
    Hazard light switch short circut engine won't start