Adjusting the height of the front
seat shoulder strap
Move button 3 to adjust the belt so
that the shoulder strap 1 is positioned
as described above.
After making the adjustment, ensure
the belt is correctly locked.
Unwind the belt slowly and smoothly
ensuring the buckle 4 clips correctly
into housing 6 (check it is locked by
pulling on buckle 4). If the belt jams,
allow it to return slightly before
unwinding it again
If the belt is jammed completely:
- pull slowly but firmly, to unwind
just over an inch (approximately
- allow the belt to rewind by itself;
- unwind the belt once more;
- if the problem persists, consult your
fastened warning light
If the driver's seat belt is
unfastened this lights up, and,
when the vehicle reaches a speed of
approximately 6 mph (10 km/h), it
will flash and a beep will sound
before the light returns to being
Press button 5 on housing 6. The belt
will rewind by itself.
Hold the buckle to help the action.