Battery-Backed Write Cache Enabler; Removing The Smart Array 5I Plus Controller Module - HP BL20p - ProLiant - G2 Setup And Installation Manual

Installing the Server Blade and Options

Battery-Backed Write Cache Enabler

The optional Battery-Backed Write Cache Enabler provides the system with a means
for storing and saving data in the event of an unexpected system shutdown.
To install the Battery-Backed Write Cache Enabler:
1. Access the internal server blade components. Refer to the "Preparation
Procedures" section in this chapter.
2. Remove the Smart Array 5i Plus Controller module from the system board by
turning the standoffs ¼ turn (1) and lifting the board (2).
Figure 1-5: Removing the Smart Array 5i Plus Controller
module
1-10 HP ProLiant BL20p Generation 2 Server Blade Setup and Installation Guide