Directly Connecting To The Server Blade Using A Usb Hub - HP BL20p - ProLiant - G2 Setup And Installation Manual

4. Connect the following to the USB hub:
a. USB CD-ROM (4) and/or a USB floppy drive
b. USB keyboard (5)
c. USB mouse (6)
NOTE: HP recommends the use of a USB hub when connecting a USB floppy and/or USB
CD-ROM drive to the server blade. This provides more available connections.
Figure 1-27: Directly connecting to the server blade
using a USB hub
HP ProLiant BL20p Generation 2 Server Blade Setup and Installation Guide
Installing the Server Blade and Options
1-37