Table of Contents
Advertisement
Removal and Replacement Procedures
Battery-Backed Write Cache Enabler
To remove the Battery-Backed Write Cache Enabler:
1. Power down the server blade and remove it from the server blade enclosure. Refer to the
"Server Blad e Preparation" section in this chapter.
2. Remove the access panel. Refer to the " Access Panel" section in this chapter.
3. Disconnect the cable from the Battery-Backed Write Cache Enabler.
Figure 2-11: Disconnecting the Battery-Backed Write Cache
Enabler cable
2-14
HP CONFIDENTIAL Codename: Reppin Part Number: 316078-005 Last Saved On: 2/23/04 10:31 AM
CAUTION: Disconnecting the battery module will cause any unsaved data in the memory
module to be lost.
HP ProLiant BL20p Generation 2 Server Blade Maintenance and Service Guide
Advertisement
Table of Contents
