HP BL20p - ProLiant - G2 Setup And Installation Manual page 68

Configuring and Deploying Server Blades
— TCP/IP networking and an IP address compatible with one of the following
the iLO Diagnostic Port IP address or an assigned DHCP or static IP address
— CD-ROM drive and/or diskette drive
— Any of the following Java Runtime Environment versions:
1.3.1_02
1.3.1_07
1.3.1_08
1.4.1
Access the Java Runtime Environment versions at
http://java.sun.com/products/archive/index.html
•
DHCP server (IP address assignment)
— Pentium or Pentium II 200-MHz or faster processor
— 64 MB of RAM
— 64 MB of free hard drive space
— 10 Mb/s network adapter
•
PXE deployment server (storing boot images)
— Intel Pentium III or higher processor (500 MHz recommended)
— 256 MB of RAM
— 10 Mb/s network adapter
— CD-ROM drive
•
NFS repository server (only required for Red Hat Linux deployment)
— Red Hat Linux 7.2 operating system installed
— Network connection
— CD-ROM drive
— NFS installed
2-18 HP ProLiant BL20p Generation 2 Server Blade Setup and Installation Guide