Option Rom Configuration For Arrays Utility - HP BL20p - ProLiant - G2 Setup And Installation Manual

Configuring and Deploying Server Blades
Table 2-1: RBSU Default Settings
Menu/Option
Server Passwords
Set Power-On Password
Set Admin Password
Advanced Options
MPS Table Mode
POST Speed Up
POST F1 Prompt
ROM Selection
Wake-on LAN
NMI Debug Button
Processor Hyper-Threading
Virtual Install Disk

Option ROM Configuration for Arrays Utility

The Option ROM Configuration for Arrays (ORCA) utility is a menu-driven utility
that does not require a CD and can be started when the server blade is booting. This
utility enables users to perform the following functions:
•
Create, configure, and/or delete logical drives
•
Specify RAID levels
•
Assign online spares
•
Set interrupts and the boot controller order
To run ORCA, press the F8 key from the iLO Remote Console when the server blade
is booting.
2-16
continued
HP ProLiant BL20p Generation 2 Server Blade Setup and Installation Guide
Default Setting
Disabled
Disabled
AutoSet Table
Enabled
Enabled
Use Current ROM
Enabled
Enabled
Enabled
Disabled