Removing the bezel
When working with some devices, such as additional optical drives, you must first
remove the bezel to access the device.
To remove the bezel, complete the following steps:
1. Remove the side cover (see "Removing the side cover" on page 18).
2. From inside the server, locate the two bezel release tabs at the bottom of the
3. Press up slightly on both bezel release tabs while pulling the bottom of the
4. Store the bezel in a safe place.
For instructions for replacing the bezel, see "Installing the bezel" on page 34.
bezel.
bezel away from the server to disengage the tabs and remove the bezel.
Bezel
release
tabs
Chapter 2. Installing options
19