Installing The Side Cover - IBM 8486 - eServer xSeries 100 User Manual

Installing the side cover

Note: You might find it easier to lay the server on its side to replace the side cover.
To replace the side cover, complete the following steps:
1. Before installing the cover, check that all cables, adapters, and other
2. Align the cover over the server (with the rear of the cover slightly hanging off
3. Use the two thumbscrews that you removed earlier to secure the cover to the
components are installed and seated correctly and that you have not left loose
tools or parts inside the server.
the rear of the server) and slide the cover toward the front of the server until it
is completely closed.
Thumbscrews
server chassis.
Chapter 2. Installing options
35