Updating Ibm Director - IBM 8486 - eServer xSeries 100 User Manual

You do not have to set any jumpers or configure the controller. However, you must
install a device driver to enable the operating system to address the controller. For
updated information about configuring the controller, see
http://www.ibm.com/support/.

Updating IBM Director

If you plan to use IBM Director to manage the server, make sure you download the
latest applicable IBM Director updates and interim fixes.
To install the latest version of IBM Director and any other applicable updates and
interim fixes, complete the following steps.
Note: Changes are made periodically to the IBM Web site. The actual procedure
might vary slightly from what is described in this document.
1. Check for the latest version of IBM Director:
2. Install the IBM Director program.
3. Download and install any applicable updates or interim fixes for the server:
46
xSeries 100 Type 8486: User's Guide
a. Go to
http://www.ibm.com/eserver/xseries/systems_management/xseries_sm/dwnl.html.
b. Follow the instructions on the Web page to download the latest version.
a. Go to http://www.ibm.com.
b. Click Support & downloads.
c. Click Downloads & drivers.
d. In the search field, type director 8486 and click Submit.
e. Select any applicable update or interim fix that you want to download.
f. Click the file link for the executable file to download the file, and follow the
instructions in the readme file to install the update or interim fix.
g. Repeat steps 3e and 3f for any additional updates or interim fixes that you
want to install.