Table of Contents
Advertisement
2000 Series | Program Entry Guide | 16.0
16.0 RF Parameters
Use the prompts in this group to configure the system for Premises RF devices. If you do not intend to use RF
devices, there is no need to change these prompts from their defaults.
1 Supervision Interval
Default:
24 (hours)
Selection:
12, 24
0
12 hours
1
24 hours
The
Supervision Interval
sends a Missing Report to the receiver for that point.
Bosch Security Systems | 7/05 | 35114F
RF Parameters
is the number of hours the RF receiver waits to hear from an RF point before it
EN | 61
Advertisement
Table of Contents
