Alarm Sources; Alarm Input - Bosch VIDEOJET X20 Installation & Operating Manual

60 en | Configuration Using a Web Browser
5.21

Alarm Sources

You can configure the alarm inputs of the VideoJet X20.
5.21.1

Alarm input

Select Active high if the alarm is to be triggered by closing the contact. Select Active low if
the alarm is to be triggered by opening the contact.
5.21.2 Name
You can enter a name for each alarm input, which is then displayed below the icon for the
alarm input on the LIVEPAGE if configured correctly (see Section 5.32 Livepage Configuration,
page 85).
V3.5 | 2007.12 Installation and Operating Manual
VideoJet X20
Bosch Security Systems