Partitioning - Bosch VIDEOJET X20 Installation & Operating Manual

VideoJet X20
5.18

Partitioning

Two partitions can be set up for recordings of the cameras connected to the VideoJet X20;
this is similar to the partitioning often found on computer hard drives. Parameters such as
size and type of video recording can be specified for each partition. Modifying these
parameters leads to reorganization, during which stored data is lost.
The unit requires a dedicated partition for the recordings of each connected camera. Each
partition is linked to its own encoder or camera input: camera input Video In 1 with partition
number 01, camera input Video In 2 with partition 02. This assignment cannot be modified. As
a result, all numbers are always displayed in the list, regardless of whether a corresponding
partition is available or has been deleted. Both potential partitions need to be configured in
order to record two cameras.
All partitions are listed in the table on the Partitioning page together with the number of the
video input (Camera), their partition name, alarm tracks, type and size.
In addition, the page provides you with an overview of the drive data; for example total
memory and number of partitions created. A pie chart indicates how much memory space is
partitioned for recordings.
Bosch Security Systems Installation and Operating Manual
Configuration Using a Web Browser | en 51
V3.5 | 2007.12